View In:
ArcGIS JavaScript
ArcGIS Online Map Viewer
ArcGIS Earth
ArcGIS Pro
Service Description: Version 4.0 of these data are part of a larger USGS project to develop an updated geospatial database of mines, mineral deposits and mineral regions in the United States. Mine and prospect-related symbols, such as those used to represent prospect pits, mines, adits, dumps, tailings, etc., hereafter referred to as “mine” symbols or features, are currently being digitized on a state-by-state basis from the 7.5-minute (1:24,000-scale) and the 15-minute (1:48,000 and 1:62,500-scale) archive of the USGS Historical Topographic Maps Collection, or acquired from available databases (California and Nevada, 1:24,000-scale only). Compilation of these features is the first phase in capturing accurate locations and general information about features related to mineral resource exploration and extraction across the U.S. To date, the compilation of 637,000-plus point and polygon mine symbols from approximately 88,000 maps across 35 states has been completed: Alabama (AL), Arizona (AZ), Arkansas (AR), California (CA), Colorado (CO), Florida (FL), Georgia (GA), Idaho (ID), Iowa (IA), Illinois (IL), Indiana (IN), Kansas (KS), Kentucky (KY), Louisiana (LA), Michigan (MI), Minnesota (MN), Mississippi (MS), Missouri (MO), Montana (MT), North Carolina (NC), North Dakota (ND), Nebraska (NE), New Mexico (NM), Nevada (NV), Oklahoma (OK), Ohio (OH), Oregon (OR), South Carolina (SC), South Dakota (SD), Tennessee (TN), Texas (TX), Utah (UT), Washington (WA), Wisconsin (WI), and Wyoming (WY). The process renders not only a more complete picture of exploration and mining in the U.S., but an approximate time line of when these activities occurred. The data may be used for land use planning, assessing abandoned mine lands and mine-related environmental impacts, assessing the value of mineral resources from Federal, State and private lands, and mapping mineralized areas and systems for input into the land management process. The data are presented as three groups of layers based on the scale of the source maps. No reconciliation between the data groups was done.
Datasets were developed by the U.S. Geological Survey Geology, Geophysics, and Geochemistry Science Center (GGGSC). Compilation work was completed by USGS student contractors: Germán Schmeda, Patrick C. Scott, William Gnesda, Margaret Hammond, Tyler Reyes, Morgan Mullins, Thomas Carroll, Margaret Brantley, and Logan Barrett; and by USGS personnel Damon Bickerstaff, Stuart A. Giles and E.G. Boyce.
First release: August 4, 2016
Revised: December 1, 2017 (ver. 1.0) Revised: April 30, 2018 (ver. 2.0)
Revised: April 10, 2019 (ver. 3.0)
Revised: November 25, 2019 (ver.4.0)
Map Name: Layers
Legend
All Layers and Tables
Dynamic Legend
Dynamic All Layers
Layers:
Description: Version 4.0 of these data are part of a larger USGS project to develop an updated geospatial database of mines, mineral deposits and mineral regions in the United States. Mine and prospect-related symbols, such as those used to represent prospect pits, mines, adits, dumps, tailings, etc., hereafter referred to as “mine” symbols or features, are currently being digitized on a state-by-state basis from the 7.5-minute (1:24,000-scale) and the 15-minute (1:48,000 and 1:62,500-scale) archive of the USGS Historical Topographic Maps Collection, or acquired from available databases (California and Nevada, 1:24,000-scale only). Compilation of these features is the first phase in capturing accurate locations and general information about features related to mineral resource exploration and extraction across the U.S. To date, the compilation of 637,000-plus point and polygon mine symbols from approximately 88,000 maps across 35 states has been completed: Alabama (AL), Arizona (AZ), Arkansas (AR), California (CA), Colorado (CO), Florida (FL), Georgia (GA), Idaho (ID), Iowa (IA), Illinois (IL), Indiana (IN), Kansas (KS), Kentucky (KY), Louisiana (LA), Michigan (MI), Minnesota (MN), Mississippi (MS), Missouri (MO), Montana (MT), North Carolina (NC), North Dakota (ND), Nebraska (NE), New Mexico (NM), Nevada (NV), Oklahoma (OK), Ohio (OH), Oregon (OR), South Carolina (SC), South Dakota (SD), Tennessee (TN), Texas (TX), Utah (UT), Washington (WA), Wisconsin (WI), and Wyoming (WY). The process renders not only a more complete picture of exploration and mining in the U.S., but an approximate time line of when these activities occurred. The data may be used for land use planning, assessing abandoned mine lands and mine-related environmental impacts, assessing the value of mineral resources from Federal, State and private lands, and mapping mineralized areas and systems for input into the land management process. The data are presented as three groups of layers based on the scale of the source maps. No reconciliation between the data groups was done.
Datasets were developed by the U.S. Geological Survey Geology, Geophysics, and Geochemistry Science Center (GGGSC). Compilation work was completed by USGS student contractors: Germán Schmeda, Patrick C. Scott, William Gnesda, Margaret Hammond, Tyler Reyes, Morgan Mullins, Thomas Carroll, Margaret Brantley, and Logan Barrett; and by USGS personnel Damon Bickerstaff, Stuart A. Giles and E.G. Boyce.
First release: August 4, 2016
Revised: December 1, 2017 (ver. 1.0) Revised: April 30, 2018 (ver. 2.0)
Revised: April 10, 2019 (ver. 3.0)
Revised: November 25, 2019 (ver.4.0)
Copyright Text: USGS
Spatial Reference:
102100
(3857)
Single Fused Map Cache: false
Initial Extent:
XMin: -1.3847866194204494E7
YMin: 3940170.864066178
XMax: -1.2204769200882621E7
YMax: 5042248.115684507
Spatial Reference: 102100
(3857)
Full Extent:
XMin: -1.3357899841881614E7
YMin: 4176542.3150024996
XMax: -1.2694735553205505E7
YMax: 5160407.336168262
Spatial Reference: 102100
(3857)
Units: esriMeters
Supported Image Format Types: PNG32,PNG24,PNG,JPG,DIB,TIFF,EMF,PS,PDF,GIF,SVG,SVGZ,BMP
Document Info:
Title:
Author:
Comments: Version 4.0 of these data are part of a larger USGS project to develop an updated geospatial database of mines, mineral deposits and mineral regions in the United States. Mine and prospect-related symbols, such as those used to represent prospect pits, mines, adits, dumps, tailings, etc., hereafter referred to as “mine” symbols or features, are currently being digitized on a state-by-state basis from the 7.5-minute (1:24,000-scale) and the 15-minute (1:48,000 and 1:62,500-scale) archive of the USGS Historical Topographic Maps Collection, or acquired from available databases (California and Nevada, 1:24,000-scale only). Compilation of these features is the first phase in capturing accurate locations and general information about features related to mineral resource exploration and extraction across the U.S. To date, the compilation of 637,000-plus point and polygon mine symbols from approximately 88,000 maps across 35 states has been completed: Alabama (AL), Arizona (AZ), Arkansas (AR), California (CA), Colorado (CO), Florida (FL), Georgia (GA), Idaho (ID), Iowa (IA), Illinois (IL), Indiana (IN), Kansas (KS), Kentucky (KY), Louisiana (LA), Michigan (MI), Minnesota (MN), Mississippi (MS), Missouri (MO), Montana (MT), North Carolina (NC), North Dakota (ND), Nebraska (NE), New Mexico (NM), Nevada (NV), Oklahoma (OK), Ohio (OH), Oregon (OR), South Carolina (SC), South Dakota (SD), Tennessee (TN), Texas (TX), Utah (UT), Washington (WA), Wisconsin (WI), and Wyoming (WY). The process renders not only a more complete picture of exploration and mining in the U.S., but an approximate time line of when these activities occurred. The data may be used for land use planning, assessing abandoned mine lands and mine-related environmental impacts, assessing the value of mineral resources from Federal, State and private lands, and mapping mineralized areas and systems for input into the land management process. The data are presented as three groups of layers based on the scale of the source maps. No reconciliation between the data groups was done.
Datasets were developed by the U.S. Geological Survey Geology, Geophysics, and Geochemistry Science Center (GGGSC). Compilation work was completed by USGS student contractors: Germán Schmeda, Patrick C. Scott, William Gnesda, Margaret Hammond, Tyler Reyes, Morgan Mullins, Thomas Carroll, Margaret Brantley, and Logan Barrett; and by USGS personnel Damon Bickerstaff, Stuart A. Giles and E.G. Boyce.
First release: August 4, 2016
Revised: December 1, 2017 (ver. 1.0) Revised: April 30, 2018 (ver. 2.0)
Revised: April 10, 2019 (ver. 3.0)
Revised: November 25, 2019 (ver.4.0)
Subject: These data are a digital version of mine symbols found on USGS 7.5- and 15-minute series topographic maps. The data are suitable for use in Geographic Information Systems (GIS) or other database and geospatial software. Collection of data of this typ
Category:
Keywords: Nevada,USGS,Mining,Mine Symbols
AntialiasingMode: None
TextAntialiasingMode: Force
Supports Dynamic Layers: true
MaxRecordCount: 100000
MaxSelectionCount: 2000
MaxImageHeight: 4096
MaxImageWidth: 4096
Supported Query Formats: JSON, geoJSON, PBF
Supports Query Data Elements: true
Min Scale: 0
Max Scale: 0
Supports Datum Transformation: true
Child Resources:
Info
Dynamic Layer
Supported Operations:
Export Map
Identify
QueryLegends
QueryDomains
Find
Return Updates
Generate KML